Longer jacket, lining: a light polyester PES fabric, with climate-membrane (waterproof and Windtight while permeability for steam from inside, taped seams), additional fabric: ERTEX - on the shoulder part (with decorative stitching) and on the side parts of jacket, 2 cross pockets, lower pockets with the flaps, all flaps are buttoned with the press button, upper pocket with a zip, jacket is fastened with a zip covered with a flap with the press buttons, inside zip pocket, tightening lace in waist and in bottom edge of jacket, inside part of – brushed cotton fabric LAROS, sleeves edges with a rubber band and with the restrictive bands, optional detachable separate hood-it is possible to attach with the press buttons to jacket
"micro-fibre", a very light, strong fabric with a polished surface (100% polyester), waterproof treatment (a textile imitation of fine deerskin)
Special, very thin fabric ensures full waterproofness and windproofness of the clothes while it also keeps breathability for the pairs from the inside. Used for modern outdoor clothes for every weather.
Size and type available:
Thanks to its appearance and qualities this extremely interesting fabric is perfect for use in the production of various types of modern elegant clothes. A special surface treatment gives this fabric an appearance and feel that is very similar to polished leather. However, compared to polished leather the fabric is extremely light and flexible. The fabric is manufactured of extremely fine fibres - “micro-fibres” – which are densely woven to create a highly resistant, strong, and light fabric.
The increase in the value of many garments is ensured by the addition of special KLIMARON cloths to ensure full waterproofness while maintaining the ability to breathe (breathability for moisture / water vapor from the inside). All seams on the climate-membrane are for a complete sealing against moisture penetration covered with a special fusing strip.
This climate-membrane KLIMARON, which has very good technical characteristics for both water-permeability and vapor permeability, is used in many types of jackets and trousers. It is an extremely thin, lightweight fabric that is sewn as a separate layer between the top fabric and the undercoat. The advantage of this method of using the climate membrane is, unlike lamination / sticking to the top layer (a cheaper way of using the climate membrane) increasing the resistance of this climate membrane - not subject to wear together with the topcoat (abrasion, tearing ...) it does not crack, unstick, do not peel, etc. Also, if the upper fabric is demaged (eg burst), the cloth does not break the membrane - the functionality of the garment remains, the top cloth can only be sewn and does not have to be glued